In automated RF testing, signals between the test equipment and the system under test often need to be switched and level-adjusted. When there are multiple test paths, this can result in a complex setup…
Read more
For RF systems on board drones, dimensions, mass, and power consumption are key design criteria. At the same time, RF payloads require sufficient output power across a wide frequency range. A compact amplifier module can help…
Read more
Modern command posts must be rapidly deployable, easy to move, and at the same time provide protection against eavesdropping and electromagnetic interference. A textile-based, RF-shielded shelter offers a practical solution for this due to its light weight…
Read more
In compact high-frequency systems, metal enclosures, cavities, and other structural components can cause unwanted microwave resonances and mutual coupling. In 77 GHz radars for ADAS driver-assistance systems, this can compromise signal integrity and, consequently, the…
Read more
In sensors that use near-infrared (NIR) light, visible and ultraviolet light can interfere with detection. This is an issue in applications such as machine vision, iris scanners, LiDAR, time-of-flight modules, and other optical sensors. A filter…
Read more
Unwanted reflections are a recurring problem in virtually any RF environment: signals bouncing off a test chamber or crosstalk between antenna systems. With the ABS-SLF-F-x V, ABS Technics offers a fully enclosed, lightweight, carbon…
Read more
Tight PCB layouts, mixed-signal designs, and frequent design changes make it difficult to effectively protect sensitive circuits against EMI/RFI. A standard shield does not always match the final PCB layout, whereas a…
Read more
In wireless power transfer (WPT), ferrite materials are used to influence the magnetic flux field of the transmitter and receiver coils. Ferrite can direct the magnetic flux in the desired direction…
Read more
Ground-based RF systems for detecting drones typically operate at higher power levels than compact RF systems used in airborne platforms. Furthermore, the amplifiers used must cover a wide frequency range…
Read more
The Shieldex Faraday Bag is designed to protect electronic equipment from unauthorized data retrieval and from external RF signals that could affect the operation or configuration of the electronics. The material…
Read more
Parker Chomerics introduces SOFT-SHIELD 4860, a high-temperature, electrically conductive foam solution for EMI shielding. The material combines silver-coated nylon fibers with a low-density silicone foam, ensuring reliable Z-axis conductivity and cost-effective…
Read more
Reliable energy absorption is essential in high-power radar applications. Conventional polymer foam absorbers can undergo thermal degradation at high power densities, resulting in a loss of performance and safety risks. ABS Technics has developed the ceramic absorption material ABS-FGA for this purpose,…
Read more
Designing 5G hardware presents new EMI/RFI challenges, particularly due to the introduction of the 60 GHz frequency. At short distances, there are many mmWave signals, tolerances are becoming tighter, and…
Read more
For applications requiring high sensitivity and accuracy, A.H. Systems offers a complete set of H-Field (magnetic field) antennas. These antennas provide a compact and efficient alternative to traditional loop antenna configurations….
Read more
In thermal design, the lowest material specification is not always sufficient as a selection criterion. In applications with wider tolerances, limited clamping force, or thermal cycles, greases or pastes are prone to pump-out, migration, and…
Read more
Fair-Rite’s flexible ferrite tiles are designed for EMI suppression in applications where limited installation space and mechanical flexibility are important factors. Unlike rigid ferrite sheets, these NiZn-based materials can easily be…
Read more
Chomerics is introducing a new generation of thermal greases for efficient heat dissipation in electronics applications. The THERM-A-GREASE series consists of four silicone-based variants with thermal conductivities of 1.5, 3.0, 5.0, and 7.0…
Read more
In many test setups, unwanted RF radiation is a source of errors and unreliable results. The Shieldex RF Shielding Blanket offers an innovative solution to this problem: a flexible fabric with a conductive coating,…
Read more
In high-tech electronics—such as quantum computing, defense, automotive, medical, and semiconductor industries—efficient heat dissipation is essential to ensuring the reliability and service life of components. Thermal interface materials (TIMs) are…
Read more
For EMC engineers conducting CS101 (MIL-STD-461G) or DO-160 testing, Schlöder offers a practical and comprehensive solution: the MGA CT B-50/100 coupling transformer with an integrated differential amplifier. This sets the system apart…
Read more
EMC springs, or fingerstocks, are used in enclosures, shielded cabinets, and on printed circuit boards as ESD contacts and EMI gaskets. For edge mounting, it is essential to consider clip size, mounting anchors, deflection parameters, and other factors…
Read more
Electronic components are becoming increasingly powerful and smaller, which places greater demands on thermal management. Thermal gap fillers offer a reliable solution: they bridge air gaps and irregularities between heat sources and heat sinks, thereby…
Read more
For engineers looking for an efficient, reliable heat interface at low pressure, Leader Tech offers a remarkable innovation with its TCI series. These thin, silver-colored films are made of a special indium composite…
Read more
For engineers working in the VLF to HF range, AH Systems offers a practical solution: the SAS-564 passive loop antenna. This compact and rugged antenna covers frequencies from 1 kHz to…
Read more
In the world of EMI shielding, gaskets are often hard and stiff, requiring high compressive forces to achieve a proper seal. Parker Chomerics breaks this pattern with the CHO-SEAL…
Read more
EMC spring contacts, or fingerstocks, were originally made of copper-beryllium (CuBe2) because of its unique combination of high electrical conductivity, excellent elasticity, and mechanical strength. For a long time, this made it the gold standard…
Read more
Fair-Rite’s new series of Oval-Snap-It and Oval-Clip-It ferrite cores offer several advantages over conventional round variants. The oval geometry is an ideal solution for common-mode chokes in which two…
Read more
In high-tech electronics—such as the aerospace, defense, telecommunications, and semiconductor industries—a reliable EMC seal is essential. Parker Chomerics is a global leader in the development of thermal interface and electrical…
Read more
Magnetic field shielding is crucial for the reliable operation of quantum computers. Traditionally, mu-metal is used for this purpose, but this material is not suitable for the extremely low temperatures at which quantum computers…
Read more
With THERM-A-GAP PAD 80LO, Parker Chomerics has developed an advanced thermal gap filler specifically designed for durable, mission-critical, and high-power electronic applications in sectors such as high-performance computing, defense, telecommunications, and automotive….
Read more